Sizing
Ask how the load was calculated and why the system size was chosen.
New system installation
AC Installation Burleson TX
We'll connect you with a local contractor who can size, quote, and install a new AC system for your home.
One easy call
Enter your ZIP code
Get connected to an experienced local contractor
What a new AC installation involves
A new system is only as good as the setup around it. The contractor you are connected with checks the home before recommending equipment, including the size and layout of the house, the ducts, the electrical service, and where the outdoor unit will sit.
- Sizing the system to the home, rather than matching an old unit by default.
- Checking ducts and airflow, including returns, supply runs, and leaks.
- Confirming electrical service and the thermostat the new system needs.
- Setting the outdoor unit on a level pad with proper line routing.
- Removing the old equipment once the new system is in.
Before you choose equipment
Questions to settle before you buy
Equipment type
Split systems and heat pumps work differently. Ask which fits your home and how you use it.
Airflow
New equipment can underperform on weak ductwork. Ask what airflow checks are included.
Permits
Ask the contractor whether the work needs a permit and who will pull it.
Why sizing matters
An oversized system cools the house quickly but shuts off before it pulls enough humidity out of the air. Rooms feel clammy, and the system short-cycles. An undersized system runs nonstop on hot days and still can't keep up.
A load calculation (Manual J) sizes the system to your home's square footage, insulation, windows, and sun exposure. Ask the contractor whether one is part of the quote.
Ductwork can make or break a new system
A new system is only as good as the ducts that carry its air. Leaky or undersized ducts lose cooling into the attic and leave some rooms warmer than others.
Ask the contractor to check duct sizing, sealing, and insulation, and whether any returns need to be added before the new equipment goes in.
Single-stage, two-stage, or variable-speed
- Single-stage systems run at full power whenever they're on. They're the simplest option.
- Two-stage systems run on a lower setting most of the time and switch to full power on the hottest days.
- Variable-speed systems adjust in small steps, running longer at low speed for steadier temperatures and better humidity control.
Ask the contractor to explain the efficiency rating (SEER2) and the trade-offs of each option for your home.
Questions to ask before you agree to an install
- Is a load calculation part of the quote, and what size system did it call for?
- Which equipment and efficiency rating are you recommending, and why?
- Is any ductwork, return, or electrical work included, or is it separate?
- Who pulls the permit, and will the work be inspected?
- How long will the installation take, and when can the system be used?
Homeowner questions
AC Installation in Burleson TX: What to Ask
How do I know if I need a new system instead of a repair?
A contractor compares the age of the system, how often repairs keep being needed, and the condition of the ducts. A new installation makes the most sense when the existing system is old or the home's airflow needs a full redesign.
Will the installer look at my ductwork?
Yes. Ductwork affects how well any new system performs, so a contractor should check returns, supply runs, and leaks before recommending equipment.
Who sizes the system?
The contractor you are connected with sizes the system based on the home and its ductwork, then explains the choice before any work begins.
Who gives the quote for the installation?
The contractor you are connected with inspects the home and provides the quote directly. We are the referral service that connects you with them.
Do I need to be home for the visit?
Ask the contractor what they need from you. Plan for access to the attic or closet, the thermostat, and the electrical panel.
Am I committed to anything by calling?
No. A call is the start of the conversation. Once we connect you, you can ask the contractor questions, hear their approach, and decide whether to proceed.
From first call to install
How getting connected works
Step 1 of 3
Call and enter your ZIP code
Call (817) 484-6890 and enter your ZIP code to reach a contractor who serves your area.
Step 2 of 3
We connect you with a contractor
An experienced local contractor who handles installations takes the call.
Step 3 of 3
Plan the install directly
You discuss equipment, sizing, and timing with the contractor, then decide whether to move forward.
Service area
The contractors we connect you with serve Burleson and the surrounding residential areas. If your current system just needs fixing, see our page on air conditioning repair in Burleson.
Thinking about a new system?
Call now to plan a new system with a local contractor.
CALL NOW: (817) 484-6890